7 COMMON DYE SUBLIMATION ISSUES

As you pursue ending up being a knowledgeable dye-sublimation printer to make SUBLIMATED JERSEYS, you may come across one or more barriers such as your transfer appearing blurred, boring or discolored. Do not get inhibited! This is all part of the understanding procedure, as well as a lot of our new sublimation customers go through a trial and error period. We’ve assembled several of one of the most regular problems associated with dye-sublimation printing in case you ever experience one.

Why aren’t my transfers appearing dynamic?
There are a couple of reasons your transfers could be coming out much less vivid than expected. First, ensure that you are publishing on the appropriate side of your sublimation paper, which is typically intense white. The other side is typically off-white. If you’re printing with a Sawgrass Virtuoso SG400 or SG800, the brilliant white side will load face-down in the tray. Next off, make certain that you are printing through the correct color adjustment program.

Why is my image ghosting?
If you are seeing a 2nd version of your transfer, like a shadow, somewhat to the side of your photo on SUBLIMATED JERSEYS, you are experiencing what is known as ghosting. Ghosting happens when the sublimation transfer paper shifts during the sublimation process, such as when you open or close your warm press. Consequently, it is advised that you tape down your hard substrates to the sublimation paper making use of thermal tape. For fabrics, we advise a glue spray to avoid the paper from relocating. After pushing, ensure you get rid of the transfer paper instantly. For sublimation, we also recommend avoiding utilizing an automobile open press as these have a tendency to pop open as well quickly, creating the paper to shift otherwise taped down all right.

Why is my substratum not accepting sublimation ink?
It is necessary to keep in mind that not all items approve sublimation ink. For dye-sublimation to work, your item blank needs to have a polyester covering (or be made from a polyester product).
For materials, we recommend 100% white polyester for the very best transfer of SUBLIMATED JERSEYS. It is not possible to sublimate on 100% cotton– as well as your transfer will remove in the very first wash cycle. You can sublimate on poly/cotton blends, but the transfer will show up less dynamic and also give a vintage look. In general, the higher degree of polyester, the much better.

Why am I getting ink from a previously transferred picture onto a new empty transfer?
Sublimation ink has the propensity to bleed onto the bottom and also top platens of your press throughout warmth transfer, which is why it is very crucial to shield your press with the appropriate product. To prevent ink from getting onto your top or lower platen, we recommend making use of a Teflon cover for every platen, along with a Teflon sheet. Teflon is totally recyclable, and all it takes is wiping away the excess ink after each press. You might also utilize silicone-treated sheets that can be discarded after use.

Why am I seeing little dots in my transfer?
If you’re noticing tiny dots on your ended up SUBLIMATED JERSEYS, this is likely as a result of excess moisture. We suggest pre-pressing most substrates to ensure you get all moisture out. After that, allow the substrate cool down, place your transfer on, and press like normal.

Why are my transfers fuzzy?
If you discover obscuring in your image when you pull the transfer paper off, this might be due to the fact that your substrate obtained too much time/temperature in the warmth press, as well as currently the photo has actually started to bleed out. If this takes place, we suggest decreasing your time and also trying once more.

Why are my pictures coming out faded?
Photo fading is usually triggered by excessive time and also temperature level, and/or stress. We recommend confirming the recommended settings from the business where you acquired your sublimation blanks. Every warm press is different, which is something to remember. An additional recommendation is to verify the temperature level of the top platen on your press to see to it straightens with the mentioned temperature level; for this, we recommend warmth strips.